Basic Reminders In Electric Dog Fences
After you've made your decision that the electric dog fence is the most suitable type of containment for your dog, focus on the proper installation of this mechanism. Nevertheless determining the area that you need to cover before buying an electric dog fence . The entire pack includes a transmitter with capacity to surround an area of approximately 25 acres. Similarly, additional cables are mandatory for bigger spaces. You want at least 500 feet of wire that will encircle 1/3 of the land.
Wires and Transmitter
Make a sketch and remember that areas should be circular because right angles confuse the transmitter. The wire forming the border must make an unbroken circle back to the transmitter.
The transmitter must set up in a dry and secure like your garage. Make sure the transmitter is not placed within a breaker box. Avoid latent intervention by installing the transformer away from water heaters or aircon units. It is suggested that you bury the wires three inches beneath the ground. If the wires of the electric dog fence show, there are risks of tripping over them or being cut by the lawnmower.
Essential Reminders
It is vital to determine how close you would like your dog to be in a position to get to the boundary of the electric dog fence without getting a caution. Adjustments can be made on the indoor transmitter. Some systems will work up to 30 feet from the boundary. Give your dog plenty of room to ramble around and play without feeling any uneasiness.
- Do not install the wire alongside electric and fone wires, television wires and antenna or near satellite dishes.
- Check with your local firms before installation if you are unsure about the position of your wire or power lines.
- Never put your transmitter within a barn or shed. There is always the risk of electrical shock or fire if the transmitter is uncovered to water. It may also sustain damage due to inclement weather.
- Install the transmitter first. Be sure to ground it as suggested by the maker.
- Position the wire along your proposed boundary.
- Connect the top of the frontier wires to the transmitter. Turn the system on.
- Test the collar to ensure it’s working properly. The collar should give off an audible alert as you approach the boundary.If everything is working well, start digging a ditch up to three inches deep along your previously planned boundary. Avoid putting the boundary wire near to the chain-link fences.
The Dog Line provides tips in canine obedience training as well as supplies dog owners witht ools like Hidden Fence . You can get more topical information and Dog Containment on the website of The Dog Line.
